Contact Us
Kitchen and Bath Logo

Custom Door Installation in Schiller Park

We install interior and exterior doors for Schiller Park homeowners who want the job done right without coordinating multiple contractors. Our installation team handles prehung and slab door fitting, shimming and leveling, hardware prep, and threshold installation. Whether you are replacing one door or outfitting a full renovation, we handle the installation alongside your purchase from our store.

What Our Door Installation Service Covers in Schiller Park

Our installation service covers interior and exterior door installation for Schiller Park homeowners who purchase doors from our store. We handle prehung unit fitting for new openings and replacement projects, slab door hanging in existing frames, hardware prep and installation, threshold fitting and adjustment on exterior units, and self-closing hardware installation on fire-rated openings.

We do not subcontract installation — the same team that works with our store handles the work. This matters because they know the product, the door units we carry, and what fit issues to look for in Schiller Park homes. Ask about installation when you purchase your door and we will schedule a visit that works around your timeline.

See what clients say

Interior Door Installation — What to Expect on Install Day

Interior door installation in Schiller Park typically follows a straightforward sequence. The old door and hardware are removed first. The rough opening is checked for plumb and square — most openings in mid-century Schiller Park homes need minor shimming on the hinge side. The prehung unit is set, shimmed, and nailed through the jamb into the framing. The door is tested for swing, latch, and gap consistency before hardware is installed.

Swing direction is confirmed before installation begins — hinge side and swing direction must match the door unit ordered. Hardware boring is checked against the lockset you are installing. If you are reusing existing hardware, confirm the backset matches the bore in the new door before the installation visit. We carry locksets and hinges at the store and can add them to your order if needed.

Custom Door Installation in Schiller Park — What to Know Before You Schedule

Door installation combines a straightforward task with enough variables to go wrong if the opening is not assessed carefully before the door is ordered. In Schiller Park homes — many built in the 1950s and 1960s — frames shift, floors settle unevenly, and original rough openings are sometimes non-standard. Our team checks these conditions before installation begins so the finished door operates correctly from day one.

  • Prehung interior and exterior door installation including shimming, leveling, and hardware prep
  • Slab door hanging in existing frames that are square and in good condition
  • Fire-rated door installation with compliant self-closing hardware at rated openings
Custom door installation

Exterior Door Installation — Why the Frame and Threshold Matter

Exterior door installation requires more preparation than interior work because the door unit must seal against weather on all four sides. The threshold must sit level and make consistent contact with the door bottom. The weatherstripping must compress evenly when the door closes. And the frame must be anchored securely into the rough framing — not just tacked in place — to hold up against the wind loads that Schiller Park winters produce.

On exterior installations we also check the sill and surrounding framing for rot or water intrusion before the new unit goes in. This is the most common hidden problem in exterior door replacements in older Schiller Park homes — water has been getting past the old threshold or weatherstrip for years and the framing directly below the sill has softened. Identifying it before installation means the repair is done right rather than sealed over.

Fire-Rated and Security Door Installation — What the Code Requires

Fire-rated door installations require additional steps beyond standard interior door work. The door must be a listed unit with the rating label intact. The frame must be a rated assembly — a standard pine jamb does not qualify for most rated applications. Self-closing hardware must be installed and adjusted so the door closes and latches fully from any open position without assistance.

We carry self-closing hinges and overhead closers compatible with the fire-rated units we sell. Security door installations — particularly those with multi-point locking systems — require accurate alignment of the locking points with the strike plate locations in the frame. We verify all locking points engage correctly before the installation is considered complete.

How to Prepare for Your Door Installation Appointment

Preparing your home before the installation visit makes the job faster and cleaner. Clear the area around the opening on both sides — remove any furniture, rugs, or items stored near the door that would block access to the frame. If the old door has a storm door or screen door, remove it before the visit or let us know so we can plan for it.

Have your hardware ready on installation day if you are supplying your own lockset or hinges. If you are reusing existing hardware, confirm in advance that the backset, bore size, and hinge size match the new door. Mismatched hardware is the most common cause of delays on installation day. If you purchased hardware from our store, we confirm compatibility when you place the order.

What Happens After the Door Is Hung

After the door is hung and hardware is installed, we walk through the finished work with you before we leave. The door is tested for smooth operation, consistent gap around the frame, positive latch engagement, and — on exterior units — weatherstrip compression at the threshold and sides. If anything needs adjustment, it is addressed before the visit ends.

Painting and casing are not included in standard installation unless arranged in advance. If you are having casing installed at the same visit, that work is done after the door is hung and before we leave. Painting is typically done by the homeowner after installation — the door arrives primed and ready for topcoat, and painting over installed casing is straightforward with a small brush at the reveal line.

Contact us

Frequently Asked Questions (FAQ)

Scheduling door installation in Schiller Park comes with specific questions. We have gathered the most common ones from homeowners who have used our installation service. If your question is not listed here, call us at (224) 781-2925 or stop in at 3977 25th Ave, Schiller Park, IL 60176.

1. Do you install doors purchased elsewhere, or only doors from your store?

We primarily install doors purchased from our Schiller Park store. This keeps the process straightforward — we know the product, the dimensions, and what hardware works with each unit. If you have questions about a door purchased elsewhere, speak with our team and we will let you know what we can accommodate.

2. How long does a door installation take?

A single interior door replacement typically takes one to two hours from start to finish. An exterior prehung door with threshold and weatherstrip adjustment takes two to three hours. If multiple doors are being installed in the same visit, total time depends on the door count and whether any openings require frame repair or shimming.

3. Do I need to be home during the installation?

Yes. We ask that a homeowner or authorized adult be present during the installation. This allows us to confirm the scope, address any questions about hardware placement or swing direction, and walk you through the completed work before we leave.

4. Does door installation include casing and trim work?

Standard installation covers the door unit, shimming, leveling, hardware prep, and threshold fitting. Casing and trim work is available as an add-on. If you are purchasing casing from our store alongside the door, ask about combining the installation into a single visit so the opening is fully finished when we leave.

5. What if the rough opening is out of square or the frame is damaged?

Minor out-of-square conditions are handled with shimming during installation — this is standard practice. If the frame is significantly out of plumb or the framing lumber is damaged or rotted, additional framing repair may be needed before the door can be properly installed. We identify these conditions during the pre-installation assessment and discuss next steps before proceeding.

6. Do you install fire-rated doors?

Yes. We install fire-rated doors purchased from our store, including the self-closing hardware required for compliant installation. Fire door installation follows the same general process as standard interior door installation, with additional attention to the self-closer and positive-latching hardware that code requires at rated openings.